Smart Energy Meters and Grid Monitoring: How IoT Connects Modern Utilities

Oct 7, 2026 5 min read IoT

Enedis has installed 38.4 million Linky smart meters, covering 96% of French households. Worldwide, utilities never bill about $39 billion worth of water a year, Liemberger and Wyatt estimate. Together, these figures show how far smart metering has spread and what poor visibility still costs.

Energy smart meters are connected devices that record electricity use in short intervals and report it to the utility automatically. Unlike older meters, they communicate both ways, so they can also receive commands. Yet a reading stuck in a basement bills nobody and flags nothing. IoT for utilities carries it reliably from the device, over a network, to software that acts on the data. Below, we trace that route for electricity meters, grid sensors, and water metering.

Energy smart meter and substation data travel via a cell tower to a utility center

How Do Energy Smart Meters Send Data?

Energy smart meters send data over power cables or through radio networks. Enedis chose the wired route for Linky. Each meter passes readings over the power line to a district concentrator, which relays them via fiber or mobile links.

By contrast, a smart energy meter using IoT often skips that middle layer. Instead, it connects to a cellular or low-power wide-area network (LPWAN) and reports straight to the utility’s head-end system. In an energy meter IoT project, you’ll usually pick from four technology families:

TechnologyConnectionTypical Fit
PLC (power line communication)Power cables to a concentratorDense urban grids
LoRaWANUnlicensed radio to gatewaysUtility-run water and gas networks
NB-IoTLicensed cellular, deep indoor reachBattery meters in basements
LTE-MLicensed cellular, higher data ratesFrequent reporting, firmware updates

For now, PLC dominates Europe’s installed base. However, Berg Insight expects NB-IoT and LTE-M to more than double their share of smart meter connections by 2031.

Grid Monitoring: Catching Faults Before Customers Call

What keeps watch over the network that feeds all those meters? Grid monitoring does, and that job matters most on a bad night.

Suppose a storm drops a branch onto an overhead line at 2 a.m. Sensors on the feeder register the fault and mark the damaged section. Their readings reach the smart grid monitoring system, usually SCADA software or an advanced distribution management system (ADMS). The control room then sends the crew straight to the fault. No one has to patrol the whole feeder in the dark.

Responses like that rely on smart grid sensors, each with its own job:

  • Line sensors clamp onto overhead feeders and measure current.
  • Fault passage indicators show crews which line section failed.
  • Transformer monitors track load and oil temperature.
  • In substations, phasor measurement units (PMUs) capture time-synchronized voltage and current.

These devices matter more each year as rooftop solar and EV charging make local power flows harder to predict. Many sit at remote, unmanned sites. When you connect them, plan for a backup network path and encrypted private links.

Sensors watch the lines. Energy smart meters cover the other end, feeding grid monitoring with data from homes and businesses across the network. When the lights go out, many send a final “last gasp” alert to the utility. Operators then see which addresses have lost power without waiting for customer calls.

Meter readings help after the repair, too. Let’s go back to that 2 a.m. storm. Once the crew restores the line, the meters downstream report in as power returns. Before the field team drives off, the control room can confirm every building is back on. Combined, sensor and meter data let grid monitoring cover the network from the substation to the customer’s front door.

What Makes an IoT Water Meter Different?

An IoT water meter reports consumption by radio, but unlike an electricity meter, it has no mains power to tap. So it usually runs on a battery, often in a pit or basement where signals struggle. That combination favors NB-IoT and LoRaWAN, which trade data speed for range and low power draw.

The payoff is in what these meters catch. Ultrasonic models have no moving parts and register flows as low as a few liters per hour. With hourly readings, you can also spot the classic leak signature: steady night flow at an empty property. Each repair chips away at non-revenue water, the losses utilities never bill.

IoT water meter in a roadside pit sends a night flow leak alert to a screen

How to Choose Connectivity for IoT in Energy and Utilities

Knowing how the data travels is half the job. The other half is picking a network that reaches every site, including the awkward ones. Before signing with a provider, review these points:

  1. Test signal in cellars and metal cabinets, not on outdoor coverage maps.
  2. Prefer modules that support NB-IoT and LTE-M, since availability differs by country.
  3. Check that backup carriers use different towers from the primary network.
  4. Size data plans for firmware updates, not just routine readings.
  5. Pilot at your hardest sites through a full season first.

Practical Example: A Smart Meter Rollout

Say you’re rolling out smart electricity meters for a regional utility, from apartment basements to rural roadside cabinets. DROAM’s multi-carrier SIMs switch automatically to the strongest available network. If one operator’s signal fades, the meter keeps reporting through another.

For wind farms and pipeline stations with weak coverage, our energy and mining connectivity adds LEO satellite and load-balancing routers. You manage every connection from one platform and get alerts on abnormal usage.

Meters and sensors stay in the field for years, and their connection has to last just as long. That means you need to treat each link as part of the asset, with its own budget and monitoring. Planning a metering or grid-sensor rollout? Tell us where your devices will sit, and our team will check coverage and prepare a quote

More from the DROAM Blog

Keep exploring borderless connectivity.

View all